How to Make a Folding Screen Using Old Hinges and Shutters

1. Align Shutters

Lay the shutters side by side on a worktable, and align their bottoms using a straightedge. (Shutter heights may vary, so be sure to use the bottoms as the baseline when taking measurements.)

2. Position Hinges

Arrange one pair of hinges along the gap between two shutters, about a foot down from the top, and the other the same distance up from the bottom. Measure from the bottom of the shutters to the bottom edge of the hinge leaves and mark their locations.

3. Transfer Measurements

Using a combination square, transfer those marks to the back of the third shutter to position the second pair of hinges.

4. Predrill Screw Holes

Remove the hinges and bore the holes for their fasteners.

5. Attach Hinges

Reposition the hinges and drive in the screws.

6. Protect Floors

Push soft vinyl furniture glides into the bottom corners of the two end shutters to help level the screen and prevent it from scuffing up your floors when you move it.

7. Unfold Screen

Set up your finished screen, and kick back with a book.

How to Make a Folding Screen Using Old Hinges and Shutters