Raised Panel Cabinet Doors

Raised Panel Cabinet Doors

Different Models For Raised Panel Cabinet Door Machine
By Steven Merusi - Ezinearticles

Creating and producing raised panel cabinets is difficult when made manually. It takes longer time to process and finish one panel. Due to this, company owners resort to a machine to help their employees. These days, there are several models of raised panel cabinet door machine already available. It varies depending on the specifics of the output.

Raised solid panel is one of the types of framed cabinet doors. It is a piece of slab which is made of medium density fiberboard which is glued with other pieces to create a center panel and a combining frame to support it. Among the offered machines, 250MC is one of the leading models. This machine is a released by Unique Machine and Tool Co and it has been in the market for over 18 years already. This machine is very efficient because it can finish one panel in a short time of 2 minutes. Another feature of this product is that, there is no need for the operator to change tools for a complete panel. This machine also has a shaper for the rear of the panel which makes it more efficient than other models. 250MC weighs approximately 1375 pounds while the 250 MC-S weigh 1700 pounds.

Additional feature for the machine is that it comes with a sliding table which is used for more accurate outputs and for preventing accidents. It also comes with three cutter heads which are piled in a spindle. It also has a turret which is easily installed for previously determined height of the cutter. Another raised panel cabinet door machine is the 290 Model Machine. This machine creates a single panel of mdf or medium density fiberboard. It produces square or arched shape doors with square corners. To further increase productivity, the machine can also be utilized as a clamp table in assembling the door panel. This is good for shops because it costs less compared with other models.

This machine comes with 3 feet by 6 feet clamp table and 4 inches by 2 inches dust reducer which is found mounted on it. There is also a 3-ich stroke cylinder which can be transferable around the table. It has 4 routers which are located in the overhear rack. These routers are one 3 1/2 HP panel, two pieces of 1 ¾ HP Plow/Bead and one piece of 7/8 HP Trim. These routers also have custom template which can be used as guides. Aside from these, the machine also comes with a complete set of tools. It works with 110 volt electrics.

Another machine is the 2720 Model which is specifically made for mass production of cabinet doors by minimizing the errors for the operator. This machine comes with a cutter for cutting and finishing outputs. The motors are safely mounted on the linear rails and columns. Programs are easy to install because the programs for it is Windows based and the machine uses a touch screen interface.

The machine can operate with a maximum part length of 110 inches and with a maximum arch height of 6.5 inches. It is has a standard 10 HP direct motors with the option of additional HSK-63 quick change motor. There are still more models and designs for raised panel cabinet door machine in the market to choose from. If you plan to buy one, read on its features to maximize your production and output.

Raised Panel Cabinet Doors