Types of Door

Types of Door

A door may slide along tracks, pivot on hinges, fold.

The door may also slide between two wall panels (pocket door).

In the case of rotation, the axis of rotation is usually vertical, but e.g. for garage doors often horizontal, above the door opening. Sometimes the axis of rotation is, with a special construction, not in the plane of the door, on the other side than that in which the door opens, to reduce the space required on the side to which the door opens. This is sometimes the case in a train, for the door to the toilet, opening inward.

Many kinds of doors have specific names, depending on their purpose. The most common variety of door consists of a single rigid panel that fills the doorway, hinged along one side so that it can fold away from the doorway in one direction but not in the other. Many variations on this basic design are possible, such as "double" doors that have two adjacent independent panels hinged on each side of the doorway.

A trapdoor is a door that is oriented horizontally in a floor or ceiling, often accessed via a ladder.

A stable door is divided in half horizontally. The top half can be opened to allow the horse to be fed, while the bottom half can be closed to keep the animal inside. Stable doors are also known as dutch doors.

A swing door has special hinges that allow it to open either outwards or inwards, and is usually sprung to keep it closed. Saloon doors are a pair of lightweight swing doors often found in public bars. Saloon doors, also known as cafe doors, often use double action hinges, which will return the door to the center, regardless of which direction it is opened, due to the double action springs in the doors.

A blind door is a door with no visible trim or operable components. It is designed to blend with the adjacent wall in all finishes, and visually to be a part of the wall, a disguised door.

An up-and-over door is often used in garages. Instead of hinges it has a mechanism, often counterbalanced or sprung, that allows it to be lifted so that it rests horizontally above the opening. Also known as an overhead door.

A barn door is a door on a barn. It is often/always found on barns, and because of a barn's immense size (often) doors are subsequently big for utility.

A French door, also called a French window, is a door that has multiple windows ("lights") set into it, the full length of the door. Traditional French doors are assembled from individual small pieces of glass and mullions. These doors are also known as true divided lite[sic] French doors. French doors made of double-pane glass (on exterior doors for insulation reasons) may have a decorative grille embedded between the panes, or may also be true divided lite French doors. The decorative grille may also be superimposed on top of single pane of glass in the door.

A louver door has fixed or movable wooden fins (often called slats or louvers) which permit open ventilation whilst preserving privacy and preventing the passage of light to the interior. Being relatively weak structures, they are most commonly used for wardrobes and drying rooms, where security is of less importance than good ventilation, although a very similar structure is commonly used to form window shutters.

A flush door is a completely smooth, panelled door, having plywood or MDF fixed over a light timber frame, the hollow parts of which are often filled with a cardboard core material. Flush doors are most commonly employed in the interior of a dwelling, although slightly more substantial versions are occasionally used as exterior doors, especially within hotels and other buildings containing many independent dwellings.

A ledge and brace door is a door made from multiple vertical planks fixed together by two horizontal planks (the ledges) and kept square by a diagonal plank (the brace).
Mechanism of the sliding door of a lift

Mechanism of the sliding door of a lift

A garden door is any door that opens to a garden or backyard. It is often used specifically for double French doors in place of a sliding glass door. In such a configuration, it has the advantage of a very large opening for moving large objects in and out.

A pet door is an opening in a door to allow pets to enter and exit without the main door being opened. It may be simply covered by a rubber flap or it may be an actual door hinged on the top that the pet can push through. Pet doors may be mounted in a sliding glass door as a new (permanent or temporary) panel. Pet doors may be unidirectional, only allowing pets to exit. Pet doors may be electronic, only allowing pets with a special electronic tag to enter.

A bifold door is door unit that has 2 to 4 sections, folding in pairs. The doors can open from either side for one pair, or fold off both sides for two pairs. Wood is the most common material, and doors may also be metal or glass. Bifolds are most commonly made for closets, but may also be used as units between rooms.

A bypass door is a door unit that has 2 or more sections. The doors can slide from each direction on an overhead track, sliding past each other. They are most commonly used in closets, in order to access one side of the closet at a time. The doors in a bypass unit will overlap slightly, in order not to have a gap between them.

A pocket door is a door that slides on rails, rather than swinging on hinges, and, when opened, slides into an open cavity within a wall.

A sliding glass door is a door made of glass that slides open and sometimes has a screen. Sliding glass doors are common in many houses, particularly as an entrance to the backyard. Such doors are also popular for use for the entrances to commercial structures.

An ambulance door is a back door for a truck or van which consists of two full-height double doors which open outward from the center. Other types of door options for these vehicles are roll up doors, hatchback doors and tailgates.

A false door is a wall decoration that looks like a door. In ancient Egyptian architecture, this was a common element in a tomb, the false door representing a gate to the afterlife. They can also be found in the funerary architecture of the desert tribes (e.g., Libyan Ghirza). It may have influenced the mihrab in a mosque.

A revolving door is a type of door that typically consists of a structure with three or four panels that meet in the center and rotate one way about a vertical axis (sometimes the movement is not in a circle, but following a more complicated path, a combination of rotation and translation). Between the point of access and the point of exit the user walks between two moving panels. The door may be motorized or the user needs to push the front panel, and the space between two panels may be designed for multiple users or a single one. This door design is used primarily to maintain an air seal from the outside, thus minimizing leaking of climate controlled air from the building and the resulting expense of compensating for the loss. This type of door is also often seen as a mark of prestige and glamour for a building and it not unusual for neighbouring buildings to install their own revolving doors when a rival building gets one.